PRODUCTS > TABLE LEGS
Normal Leg Lengths are 34-1/2 " for table heights of 36".
13.50 Each
The first table requires four legs. Subsequent tables only require two legs. Depending on your layout Octamods will require 2 or 4 legs. Custom leg lengths can be ordered and are priced accordingly. The legs are sold with the locking hinges and screws. Holes are predrilled in the table and legs.
Please note:
These legs are for display purposes only. If you tug or bump the table system, it will wobble, or rather spring, but will return to its position. This could be a problem with other table construction styles that do not lock solidly together as it would most definitely separate. But KamKonnect tables lock together as one unit, and therefore moves as one piece. The table system was originally designed to be as lightweight as possible to travel easily. Angle bracing can be added by the purchaser to bring as much stability as desired.
13.50 Each
The first table requires four legs. Subsequent tables only require two legs. Depending on your layout Octamods will require 2 or 4 legs. Custom leg lengths can be ordered and are priced accordingly. The legs are sold with the locking hinges and screws. Holes are predrilled in the table and legs.
Please note:
These legs are for display purposes only. If you tug or bump the table system, it will wobble, or rather spring, but will return to its position. This could be a problem with other table construction styles that do not lock solidly together as it would most definitely separate. But KamKonnect tables lock together as one unit, and therefore moves as one piece. The table system was originally designed to be as lightweight as possible to travel easily. Angle bracing can be added by the purchaser to bring as much stability as desired.
BRACES

Adjustable LEVELERS
As model railroader and other hobbyists who attend tradeshows will tell you, "No floor is the same." Kam Konnect® tables can accommodate a floor that is not completely flat with its levelers that simply un-screw from within the leg.
SHORTER LEG LENGTHS

Legs only cost more than normal if they're longer than 34 1/2", our standard length. If you want legs 28 1/2" long for a 30" table height, the legs are still priced at $27/pair. Kam Konnect legs are hand made from German Beech.
Legs are pre-drilled to fit our standard locking hinges. Legs come with hinges, mounting screws, and T-Nut height adjustment bolts.
Legs are pre-drilled to fit our standard locking hinges. Legs come with hinges, mounting screws, and T-Nut height adjustment bolts.

You can always order tables without legs. Some clients order tables and fit them on top of existing home furniture or bench tops. Some modelers order 12" and 18" wide tables for shelf units. If you want to fashion your own legs... no problem. However, you can order a pair of 28 1/2" legs for the same price as our standard 34 1/2" legs and receive Legs, Locking hinges, T-Nut's recessed into the bottom of the leg, and the T-Nut bolts.